test

Replacement for an old unit for Pool and Spa ventilation The special features of this project has been to enter a disassemble a fully assembled unit and bring in parts and reassemble indoors in the basement and complete the unit with pool water recovery. The temperature and humidity are controlled by return air flow and the complete system is under the supervision of the BMS system through Modbus connection. Air volume: 1000 m³/h. Series: SKW Comp1000 PHP-TIR BWK. Mounting: At the Indoor. Connection:  All on the top of the unit

New ventilation system for the swimming pool ventilation and dehumidification. Air volume: 17000 m³/h Series: SKW 6.3HP Mounting: At the Intdoor

The prototype project in Tallinn, Estonia for Reval Sport Swim Club features energy recovery ventilation and a 1MW heat recovery system with a COPsys of 16.5. The SKW Water series build with technical art includes automated cleaning, monitoring, and processing of water, resulting in significant energy savings. Follow energy usage in kWh through our monitoring app for improved energy efficiency.

Sale and installation of a dehumidification unit for a diving centre (Nemo33) located in Uccle, Belgium The particularity of this project is the dismantling of the old dehumidification unit and the ducts The SKW 6.4 Pool with its integrated heat pump and water cooler was installed with the new ducts. Air Volume: 12.800 m³. Largest air volume: 12.800 m³. Smallest air volume: 12.800 m³. Serie: SKW 6.4 Pool

New ventilation system for the stockage of the medication, hospital stocked material and a reception area.  The special features of this project are on the one hand the reversible heat pump without any electrical or hot water nor any chilled water as the location is remote and an ultra quiet reliable apparatus was needed. The temperature is controlled by return air flow and the complete system is under the supervision of the Hospitals SAIA BMS. Number of units: 1  Air volume: 1500 m³//h. Series: SKW Comp1500 RHP-TIR. Mounting: At the Indoor. Connection:  All on the top of the unit

Powder mill production process air is taken through our RunAround systems, which recover energy for the supply air. The air from powder mill production is humid, dusty, and highly corrosive. That is handled with our C4 corrosive resistance composite casing. Units are all on roof top o the production building on height of 30m. Number of units: 4. Air Volume: 216.000 m³. Largest air volume: 72 000 m³. Smallest air volume: 36 000. m³. Serie: 2xSKW8.7, 2xSKW8.6. Type: Rooftop units

Renovation project where the existing unit was removed and a new unit was assambled and installed. Air volume: 8000 m³//h. Series: SKW 6.2. Mounting: At the Intdoor

The Volta 1 building was renovated in 2021, and the challenges were that there were not enough energy sources (non-electric and non-heating energy) and no space inside the building. All units are built on the roof and have integrated heat pumps with reversible solutions. By cooling in the summer and heating in the winter with a single heat pump system, efficiency is secured by the smart algorithm that avoids defrosting and uses bypass systems to work against each other. Total air volume: 40 000 m³/h Smallest air volume: 1.100 m³/h Highest air volume: 20.500 m³/h Serie: SKW

Taltech University tests the behaviour of different wall segments under simulated outdoor climate conditions (-30 to 50°C) and a simulated indoor living climate (18-22°C with 20-30% RelH). The solution to this task consists of two identical units. These are stacked one on top of the other inside a chamber to circulate the air one after the other. Frozen (-40°C) polyethylene is produced for the reserve tank. The cooling coils in the two units circulate the air, and by monitoring the freezing level of the coils, the units are switched to defrost one after the other. The room is heated up to 50 °C with an electric heating coil. The customer can set different modes, steps, speeds, and positions smoothly over the webinterface or on the 21” display on the control panel. Number of units: 1. Air volume: 5 000 m³/h. Largest air volume: 2.500 m³/h. Smallest air volume: 2.500 m³/h. Serie: SKW Special. Build art: Special unit room in room

New build where special unit design was required due to the space requirement. Unit was delivered as an IKEA package and built together at sight by Skawen specialists. Heating and cooling coils were separated to separate casing in a distance from the unit. Controlling and running of the unit was made by Skawen. Air Volume: 6.500 m³/h Serie: SKW5.3 Recu Build art: In ventilation chamber

New ventilation system for the laboratory of metrological measurements. The special features of this project are control of the temperature and humidity all year round. Number of units: 1 Air volume: 3600 m3/h Series: SKW 4.2 Mounting: At the Indoor Connection : All on the top of the unit

Sale and installation of three units in the Margraff Hotel in Saint-Vith, Belgium: The particularity of this project is the sale of three units: 1 dehumidification unit and 2 ventilation units The 2 ventilation units are equipped with 4 silencers each to have an auditive comfort. All units were dismantled and reassembled in the room. Number of units: 3 Air Volume: 4.650 m³ Largest air volume: 3.000 m³ Smallest air volume: 720 m³. Serie: SKW Comp3000HP Pool, SKWComp 1000, SKWComp 1000

Public swimming pool serving the school pupils, general-public and private classes. Swimming pool has an adjustable height of basin for use for all ages and activities. The pool is used 6-7 days a week based on the daily schedules and activities. Upgrade swimming pool installation in Switzerland with our efficient SKW units including SKW PoolHP, SKW Changing Room AHU, and SKW Recu for optimal ventilation and energy efficiency. SKW PoolHP 6500 m³./h; SKW Recu 2100 m³./h

Discover our new building project in Vilnius' OZAS Mall, featuring a powerful SKW 18 outdoor ventilation and dehumidification system with 28000 m³/h air volume for the public swimming pool. Series: SKW 18. Mounting: At the Outdoor

Sale and installation of a unit for the construction of a building in Wickrange, Luxembourg: We installed an SKW5.3 for the ventilation of the building, we needed the constant pressure to pulse the air at 22 °C. Air Volume: 7.840 m³. Serie: SKW5.3

We supplied two units for the renovation of the Collège des Perrerets swimming pool. The SKW3.2 ventilates the changing rooms, the SKW4.3 Pool HP is a pool dehumidifier with an integrated heat pump. Both units had to be delivered in individual cubes, as they had to be lowered 8 metres into the ground through a cellar shaft measuring approximately 1.40 x 1.20 metres. The units were then reassembled there. Air Volume: 8.700 m³. Largest air volume: 6.500 m³ .Smallest air volume: 2.200 m³. Serie: SKW3.2 , SKW4.3HP Pool

Renovation project where the existing unit was to be removed and a new unit with a heat pump and pool water recovery was to be installed by using normal doors. Project type: Renovation. Ventilation: Dehumidification. Country: Estonia. Town: Saku Number of units: 1 Airvolume: 10.000 m3/h. Serie: SKW10 PoolHP. Build art: In ventilation chamber

Sale and installation of a dehumidifier unit for a hotel in Spa, Belgium The particularity of this project is the delivery in 2 parts, because the unit did not fit through the doors, so the split option allowed us to split the unit in 2. Air Volume: 6.500 m³ Largest air volume: 6.500 m³. Smallest air volume: 6.500 m³. Serie: SKW4.3 Pool

The Cube in Weinstadt is a sports and leisure centre. Interested parties can choose from a wide range of sports and relaxation options, so that a wide variety of requirements are placed on the room conditions. A constant supply air temperature is provided by the unit, but there are separate temperature controls for three different showers. In addition, there are three independent CO2 control loops for controlling the outdoor air mass flow. These controls can be overridden individually (depending on the room) via a push-button for a short time in order to run an increased outdoor air mass flow. Total air volume: 15.300 m³ Biggest single air : 15.300 m³ volume Smallest single air: 15.300 m³ volume Series/ Line: SKW13. Special features: One Roof unit with extended building control

During the renovation of the swimming pool of the city of Gronau, the ventilation units were completely renewed. Since the new units for the changing room and entrance hall were given larger volumes due to new guidelines, they had to be repositioned from the basement to the roof. Thanks to our equipment construction method, these could be placed on the roof (fig. 2) without causing any problems and without any static changes. The swimming pool dehumidifier had to be delivered in individual cubes, as it had to be lowered through a cellar shaft with dimensions of X * Y metres to a depth of 5 metres. The unit was then reassembled there.

Six units 1000-3400m3/h

Sale and installation of a dehumidifier unit for a guesthouse in Schoppen, Belgium The particularity of this project is the delivery in 2 parts, because the unit did not fit through the doors, so the split option allowed us to split the unit in 2. Number of units: 1  Air Volume: 1.000 m³. Largest air volume: 1.000 m³. Smallest air volume: 1.000 m³. Serie: SKW Comp1000 Pool

The Neckarpark sports pool is anew construction of a competition swimming hall in the heart of Stuttgart's city centre, which is scheduled to open in 2022. We supplied 5 units of various sizes. Of these, two are swimming pool dehumidification units with integrated heat pumps, one is a ventilation unit for the changing rooms and one is a unit for the foyer and ancillary rooms. These units are all equipped with supply air filters. The last and smallest unit is used to ventilate the technical room. Number of units: 5. Total air volume: 74.200 m³. Biggest single air : 26.000 m³. Smallest single air: 3.200 m³. Series/ Line: SKW7.5 Pool HP, SKW6.3, SKW3.2

Retrofit ventilation of a room that had been converted into a meeting and conference room. The special features of this project are the reversible heat pump and an electric heating coil in the unit, as no hot water supply could be provided. In addition, the static heating of the room is also controlled and regulated via the unit's control system. Total air volume: 2.200 m³ Series: SKWComp3000HP

Two units - 1800 m³/h & 1300 m³/h.

Laboratory for Gas measuring equipment calibration. The room climate have to remain exact and precision(+/-0,5C and +/-5% relH) The room air is recirculated ca 10 times per hour rate to get fast weed back to control when air is heated, cooled, humidified or dehumidified. A Special request and solution is extra fresh air add-on if people are in the laboratory. The fresh air and exhaust air are taken over enthalpy heat exchanger and controlled with VAV valves. ). Air volume: 4500 m³/h

One unit of 8.000 m³/h with heat pump and control. Renovation project where the existing unit was to be removed and a new unit with heat pump and pool water recovery was to be installed by using normal doors. As well the unit is designed to be fitted in narrow room height. Unit is equipped with a heat pump and pool water condenser. Additionally is controlled pool water temperature.

Skawen Compact prototype units were built in Stock office boxes handling different sizes and demands of the building. All units are build in to the small ventilation chambers/wardrobes reducing the space demand for the technical room and giving larger useful working space for the customer. Number of units: 5. Air volume: 13 000 m³. Largest air volume: 3400m³. Smallest air volume: 1000 m³. Series: SKW Compact