Viimsi Artium – A Customized Ventilation Solution for a New Build, Estonia
Prev
Close Control Ventilation for Laboratory of Metrological Measurements | BelGIM, BelarusNew ventilation system for the laboratory of metrological measurements. The special features of this project are control of the temperature and humidity all year round. Number of units: 1 Air volume: 3600 m3/h Series: SKW 4.2 Mounting: At the Indoor Connection : All on the top of the unitNextSpecial Climate Chamber for Testing Wall Segments at Taltech University in Tallinn, EstoniaTaltech University tests the behaviour of different wall segments under simulated outdoor climate conditions (-30 to 50°C) and a simulated indoor living climate (18-22°C with 20-30% RelH). The solution to this task consists of two identical units. These are stacked one on top of the other inside a chamber to circulate the air one after the other. Frozen (-40°C) polyethylene is produced for the reserve tank. The cooling coils in the two units circulate the air, and by monitoring the freezing level of the coils, the units are switched to defrost one after the other. The room is heated up to 50 °C with an electric heating coil. The customer can set different modes, steps, speeds, and positions smoothly over the webinterface or on the 21” display on the control panel. Number of units: 1. Air volume: 5 000 m³/h. Largest air volume: 2.500 m³/h. Smallest air volume: 2.500 m³/h. Serie: SKW Special. Build art: Special unit room in room
Close Control Ventilation for Laboratory of Metrological Measurements | BelGIM, BelarusNew ventilation system for the laboratory of metrological measurements. The special features of this project are control of the temperature and humidity all year round. Number of units: 1 Air volume: 3600 m3/h Series: SKW 4.2 Mounting: At the Indoor Connection : All on the top of the unitNext
Special Climate Chamber for Testing Wall Segments at Taltech University in Tallinn, EstoniaTaltech University tests the behaviour of different wall segments under simulated outdoor climate conditions (-30 to 50°C) and a simulated indoor living climate (18-22°C with 20-30% RelH). The solution to this task consists of two identical units. These are stacked one on top of the other inside a chamber to circulate the air one after the other. Frozen (-40°C) polyethylene is produced for the reserve tank. The cooling coils in the two units circulate the air, and by monitoring the freezing level of the coils, the units are switched to defrost one after the other. The room is heated up to 50 °C with an electric heating coil. The customer can set different modes, steps, speeds, and positions smoothly over the webinterface or on the 21” display on the control panel. Number of units: 1. Air volume: 5 000 m³/h. Largest air volume: 2.500 m³/h. Smallest air volume: 2.500 m³/h. Serie: SKW Special. Build art: Special unit room in room
